Toshiba e-STUDIO200L Service Manual page 233

(7) Take off the tray-up motor.
Note:
Match the boss of the gear with the hole of
the cover when installing the motor.
[U] Transport drive unit / Upper transport clutch / Middle transport clutch / Lower transport
clutch
(1) Take off the right upper cover-3, connecting
port cover and right rear hinge cover
( P.2-34 "[H] Right upper cover-3",
37 "[O] Connecting port cover",
"[Q] Right rear hinge cover").
(2) Take off the tray drive unit
( P.9-26 "[T] Tray drive unit / Tray-up
motor").
(3) Take off the main motor drive unit
( P.10-5 "[B] Main motor drive unit").
(4) Remove 1 screw and take off the bracket fix-
ing the upper transport clutch and 1 bushing.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Tray-up motor
P.2-
P.2-39
Bushing
Upper transport clutch
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 27
Fig. 9-48
Fig. 9-49
Fig. 9-50
PAPER FEEDING SYSTEM
9