Toshiba e-STUDIO200L Service Manual page 78

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO200L:
Table of Contents

Advertisement

(6)
Remove 4 screws and take off the HDD from
the bracket. Disconnect 2 connectors.
Remove 1 screw and take off the ground
wire.
(7)
Disconnect 1 connector. Remove 2 screws
and take off the HDD cooling fan from the
SYS board cover.
[B] NIC board (GF-1150)
e-STUDIO200L/230/230L/280/280S only
(1)
Take off the SYS board lower cover and SYS
board upper cover
(
P.2-41 "[A] Hard disk (HDD)").
(2)
Release 2 locking supports, remove 2
screws, and then take off the NIC board.
Note:
NIC board is available as an option (GF-
1150) for some destinations or versions.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
OUTLINE OF THE MACHINE
Ground wire
HDD cooling fan
NIC board
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 44
05/11
HDD
Fig. 2-52
Fig. 2-53
Fig. 2-54

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents