Toshiba e-STUDIO200L Service Manual page 234

(5) Disconnect 1 connector and release the har-
ness from 1 harness clamp. Then take off the
upper transport clutch.
(6) Remove 3 screws. Release the harness from
1 harness clamp and take off the fixing
bracket.
(7) Disconnect 1 connector. Take off 1 bushing
and middle transport clutch.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
PAPER FEEDING SYSTEM
Harness clamp
Connector
Upper transport clutch
Harness clamp
Connector
Bushing
Middle transport clutch
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
9 - 28
Fig. 9-51
Fixing bracket
Fig. 9-52
Fig. 9-53