[L] Tray-up sensor
(1)
Take off the drawer feeding unit
(
P.9-20 "[K] Drawer feeding unit").
(2)
Disconnect the connector and release the
latches to take off the tray-up sensor.
[M] Empty sensor
(1)
Take off the drawer feeding unit
(
P.9-20 "[K] Drawer feeding unit").
(2)
Disconnect the connector and release the
latches to take off the empty sensor.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-31
Empty sensor
Fig. 9-32
e-STUDIO200L/202L/203L/230/232/233/280/282/283
9 - 21
Tray-up sensor
PAPER FEEDING SYSTEM
9