Toshiba e-STUDIO200L Service Manual page 151

[B] Control panel unit
(1) Take off the front upper cover, right upper
cover-1 and right upper cover-2
( P.2-32 "[E] Front upper cover",
"[F] Right upper cover-1",
Right upper cover-2").
(2) Disconnect 1 connector.
(3) Remove 2 screws and 2 harness clamps.
Then release the harness from 3 harness
clamps.
(4) Lower the control panel unit and remove 4
screws.
(5) Take off the control panel unit while sliding it.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
P.2-33
P.2-33 "[G]
Control panel
unit
5 - 17
05/11
Fig. 5-10
Fig. 5-11
e-STUDIO200L/202L/203L/230/232/233/280/282/283
CONTROL PANEL
5