Toshiba e-STUDIO200L Service Manual page 283

[G] Guide roller / Developer sleeve
(1) Remove the developer material
( P.12-10 "[C] Removing developer mate-
rial").
(2) Remove 2 screws and take off the recovered
toner supply unit.
(3) Remove 1 screw. Disconnect 1 connector
while taking off the recovered toner drive
unit. Remove 1 gear.
(4) Remove 2 plate springs fixing the doctor
sleeve on its both ends.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 12-16
Gear
Recovered toner drive unit
Fig. 12-17
Plate spring
Fig. 12-18
e-STUDIO200L/202L/203L/230/232/233/280/282/283
12 - 13
Recovered toner
supply unit
Connector
Plate spring
DEVELOPMENT SYSTEM
12