Fuser Unit - Toshiba e-Studio2505AC Hardware Troubleshooting Manual

E-studio5005ac series; e-studio5008a series. multifunctional digital colog system / multifunctional digital systems.
Hide thumbs Also See for e-Studio2505AC:
Table of Contents

Advertisement

1.TROUBLESHOOTING FOR THE HARDWARE
3
open the transport guide toward you and remove the misfed paper.
Be sure not to touch the photoconductive drum when removing the misfed paper. This could stain copy images.
Close the automatic duplexing unit cover.
4
 Fuser unit
 Be careful not to let your fingers be caught between the equipment and the duplexing unit cover or
automatic duplexing unit cover.
This could injure you.
 Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
1
Open the automatic duplexing unit cover on the right.
For e-STUDIO2000AC/2500AC and e-STUDIO5008A Series, press down the two green fuser
2
pressure release levers until they stop.
Clearing a Paper Misfeed 35

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents