Y Driving Shaft Assembly Attachment - Brother PR600II Service Manual

Main unit
14

Y driving shaft assembly attachment

1. Apply FBK OIL RO100 to the 2 felts 1.
2. Attach the felts 1 to the metal collars on the base frame. (2 locations)
3. Attach the Y driving shaft assembly 2 to the base frame.
4. Secure the 2 metal pressers A 3 with the 2 screws 1.
5. Adjust the collar's 4 position (right/left) to eliminate any backlash in the
shaft direction, and then secure the collar with the 2 screws 2.
6. Apply oiler to the Y driving shaft's 2 metals.
Start movie clip (CD-ROM version only)
Apply FBK OIL RO100 to the felts.
Apply oiler to the Y driving shaft's metals.
1
2
15
Y-motor final assembly
1. Attach the Y-motor final assembly 1 to the Y-motor stay 2 with the 2
screws 1.
1
3 - 86
Feed unit
Taptite, Bind S
M4X10
Set Screw, Socket (CP)
M3X4
Screw, Pan (S/P washer)
M3X6DA
Soak the felts in
FBK OIL RO100.
1 to 2 drops
Torque
1.47 – 1.96 N-m
Torque
0.78 – 1.18 N-m
Torque
0.59 – 0.78 N-m
1
2
3 2 4
1 2
1
1
2