Brother PR600II Service Manual page 273

Hide thumbs Also See for PR600II:
Table of Contents

Advertisement

Adjustment
1. Remove the bobbin case.
2. Enter test mode and press [MAIN BOARD TEST MODE] and then [PICKER MOTOR TEST].
3. Press [MOVE PICKER MOTOR] to release the picker, and then attach the bobbin case with a bobbin inserted to
the rotary hook.
4. Press [MOVE PICKER MOTOR] to turn the picker on.
5. Press [ ← ] or [ → ] (OVER PULSE) to adjust the clearance should be 0.45 mm - 1.05 mm between the bobbin
and the picker tip.
6. If the clearance cannot be adjusted by following the above procedure, move the picker holder attachment screw
1 back and forth to adjust the clearance..
Clearance between bobbin and picker tip
1
0.95 - 1.05mm
Picker activation adjustment
Bolt, Socket
M3X5
Color; Black
0.95 - 1.05 mm
Torque
0.59 - 0.78 N-m
Picker
1
4 - 33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr620

Table of Contents