Base Cover L Attachment - Brother PR600II Service Manual

Main unit
15

Base cover L attachment

1. Attach the groove cover A 2 and the groove cover B 3 to the rear of the
base cover L 1.
2. Attach the groove cover C 5 to the rear of the base cover L lid 4.
3. Attach the base cover L with the 3 screws 1.
*Key point
• Fully draw the X-guide toward you before attachment.
4. Attach the base cover L lid to the base cover L with the 2 screws 2.
5. Attach the 2 screw covers.
Start movie clip (CD-ROM version only)
1
2
3 - 100
Main unit
Screw, Pan (S/P washer)
M4X10DB
Torque
0.78 – 1.18 N-m
4 3 1
2
5
1
2