Board Case Removal - Brother PR600II Service Manual

Main unit
8

Board case removal

1. Remove the 2 screws 1, and then remove the board case 1.
2. Remove the screw 2, and then remove the clip 2.
9
Panel PCB assembly removal
1. Remove FFC 1.
*Key point
• Unlock the connector, and pull out the FFC 1.
2. Remove the FFC 2, and then remove the ferrite core 3.
*Key point
• Unlock the connector, and pull out the FFC 2.
3. Remove the 2 lead wires.
4. Remove the 7 screws 1, and then remove the panel PCB assembly 4.
10
Inverter D6 removal
1. Remove the lead wire 1.
2. Remove the 2 screws 1, and then remove inverter D6 2 and the 2 inverter
PCB collars 3.
Operation panel
1 2
2
1
1 4 1
1 2 3
2
1 1
3
2 - 77