Needle Threading Check - Brother PR600II Service Manual

Hide thumbs Also See for PR600II:
Table of Contents

Advertisement

Check

Needle threading check

1. Enter the test mode, and press [MAIN BOARD TEST MODE] and then [THREAD SET MOTOR TEST].
2. Press [MOVE ORIGIN POSITION] to move the hook to its origin.
3. Press [MOVE THREAD SET MOTOR] to check that the hook passes through the needle hole.
4. Check that the hook passes through the needle hole for the other 5 needle bars.
*Key point
• Press [CLOSE], [MAIN BOARD TEST MODE], and then [NEEDLE THREADER], and then pressing [←] or
[→] selects the other needle bars.
4 - 29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr620

Table of Contents