Download  Print this page

Tension Base Lead Wire Assembly Attachment - Brother PR600II Service Manual

Hide thumbs

Advertisement

Main unit
13

Tension base lead wire assembly attachment

1. Connect the tension base lead wire assembly 1 to the head PCB assembly.
2. Attach the cord bush (KR51) 2 to the tension base lead wire assembly,
and then push it into the groove 3 on the tension base bracket.
Start movie clip (CD-ROM version only)
14
Tension nut attachment
1. Attach the tension disc felt 1, rotary disc assembly 2, tension disc felt 1,
tension disc presser 3, spring
locations)
NOTE
• Insert the thread tension washer 6 between the spring
and the washer 4 only for thread tension A.
*Key point
• Attach the rotary disc assembly 2 so that the magnetic
surface is facing down.
• Attach the spring
bottom.
• Tighten the tension nut 5 two turns clockwise.
Start movie clip (CD-ROM version only)
S51
Thread tension unit
, washer 4, and tension nut 5. (6
S51
S51
so that the larger diameter end is at the
9.5
THREAD SPRING
18
S51
XC6232***
1
3
2
5
6
4
S51
3
A
1
2
1
3 - 19

Advertisement

Table of Contents

   Related Manuals for Brother PR600II

This manual is also suitable for:

Pr620

Comments to this Manuals

Symbols: 0
Latest comments: