Movable Knife Origin Adjustment - Brother PR600II Service Manual

Hide thumbs Also See for PR600II:
Table of Contents

Advertisement

Adjustment
1. Enter the test mode, and press [MAIN BOARD TEST MODE] and then [TRIM MOTOR TEST].
2. Press [MOVE ORIGIN POSITION] to move the needle plate base assembly's movable knife to its origin.
3. Loosen the 2 screws 1.
4. Adjust the position the movable knife stops.
5. Tighten the 2 screws 1.
Distance between edges of movable knife and
fixed knife
1

Movable knife origin adjustment

Screw, Bind
M3X4
1 mm
1 mm
Torque
0.78 - 1.18 N-m
1
4 - 33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr620

Table of Contents