Main unit
2
Case bracket assembly
1. Attach the 2 ball bearings 694 to the case bracket assembly 1, and attach
the 2 retaining rings E3.
2. Place the 4 washers (plain S, 4) in the case bracket assembly 1, and then
attach the case guide US 2 with the 4 screws 1.
*Key point
• Temporarily tighten the screw 1 first. Firmly tighten it after
completing 3 - 52 "Case bracket assembly attachment."
Start movie clip (CD-ROM version only)
1
Needle bar unit
Bolt, Socket
Hand start
M4X8
Torque
1
Retaining ring E3
2
3 - 51