Operation Panel B Assembly Removal - Brother PR600II Service Manual

Main unit
6

Operation panel B assembly removal

1. Remove the 4 screws 1, and then remove the operation panel B assembly
1.
2. Remove the screw 2, and then remove the grounding wire 2 on the panel
lead wire assembly from the PCB attachment plate.
3. Remove the 2 lead wires 3 on the operation panel B assembly 1 from the
panel PCB.
7
Operation panel B ASSY disassembly
1. Remove USB lead wire assembly A 1 and the panel lead wire assembly
2 from operation panel B 3.
*Key point
• Remove these parts while pushing the lock holding the cord
bushing 4 from the inside of operation panel B.
2. Remove the cord bushing 4 from USB lead wire assembly A 1 and the
panel lead wire assembly 2.
*Key point
• Remove the lock, and then remove the cord bushing 4.
2 - 76
Operation panel
1
1
3
2 2
3 2
1
4 1
4 2
4