Download  Print this page

Spool Stand Frame Assembly (step 1) - Brother PR600II Service Manual

Hide thumbs

Advertisement

Main unit
4

Spool stand frame assembly (Step 1)

1. Attach the retaining ring E8 to the spool stand stud 1. (2 sets)
2. Attach the spool stand stud to spool stand frame R 2, attach the plain
washer (S10) 3, spring washer 4, and spool stand link 5 to the tip of the
spool stand stud, and then attach the retaining ring E8.
3. Attach the spool stand stud to spool stand frame L 6, attach the plain
washer (S10) 3, spring washer 4, and spool stand link 5 to the tip of the
spool stand stud, and then attach the retaining ring E8.
5
Spool stand frame assembly (Step 2)
1. Attach spool stand frames L and R to the spool stand base with the 2 stud
screws 1, 2 spring washers 2, and 2 plain washers (S10) 3.
2. Put spool stand link R 4, the washer 5, spool stand link L 6, and the
other washer 5 together, and then attach them to the spool stand base with
the thumb bolt (M4L) 7.
3. Attach the 6 spool pins 8 and the 2 sponges 9 to spool frame stands R
and L.
Tightening torque of stud screw
3 - 14
Thread tension unit
1.18 - 1.57 N-m
6
2
1
3
4
5
9
1
2
1
2
3
7
6
5 4
8

Advertisement

Table of Contents

   Related Manuals for Brother PR600II

   Related Content for Brother PR600II

This manual is also suitable for:

Pr620

Comments to this Manuals

Symbols: 0
Latest comments: