Download  Print this page


Hoop sensor adjustment
1. Attach the hoop stay assembly to the feed unit.
2. Enter the test mode, and press [MAIN BOARD TEST MODE] and then [A/D TEST].
3. After the hoop stay assembly's LL-hoop has been attached, press [LL] to save the A/D value.
4. Replace the LL-hoop with the S-hoop, and then press [S] to save the A/D value.
5. After adjustment, move the tubular round arm L, and check that the hoop size matches the display on the test
mode screen.
4 - 36


Table of Contents

   Related Manuals for Brother PR600II

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: