Thread Motor Assembly Attachment - Brother PR600II Service Manual

Hide thumbs Also See for PR600II:
Table of Contents

Advertisement

Main unit
1

Thread motor assembly attachment

1. Attach the base plate assembly 2 to the thread guide base 1 with the 2
screws 1.
*Key point
• Firmly tighten the 2 screws 2 after completing 4 - 27 "Needle
threader adjustment (up/down)."
2. Attach the thread motor assembly 3 and the 2 spacers 4 to the base plate
assembly 3 with the 2 screws 2.
3. Paint the thread motor's connector red.
4. Attach the lead wire guide 5 to the thread guide base 1 with the 2 screws
3.
5. Attach the LED light assembly 6 to the thread guide base 1 with the
screw 4.
*Key point
• Thread the lead wire of the LED light assembly 6 through the
lead wire guide 5.
Start movie clip (CD-ROM version only)
1
2
3
4
Needle thread unit
Screw, Pan (S/P washer)
Hand start
M4X8DB
Screw, Pan
0.59 – 0.78 N-m
M3X6
Screw, Pan
0.59 – 0.78 N-m
M3X4
Screw, Pan (S/P washer)
0.59 – 0.78 N-m
M3X6
1
2
3
5
Torque
3
Torque
Torque
Torque
2
4
1
4
2
6
4
3 - 69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr620

Table of Contents