Brother PR600II Service Manual page 254

Hide thumbs Also See for PR600II:
Table of Contents

Advertisement

Test mode
7. USB-F file list
Select this mode to display a list of the files transferred from the PC to check that the USB function is operating correctly.
8. Touch Panel adj
Select this mode to adjust the touch panel.
This mode can also be started as follows:
1) Press the [POWER] switch with one hand while touching the screen with your other hand.
2) Press the [THREAD CUT] button on the <Brightness Adjustment> screen.
Touch the center of the [+] symbols with a stylus pen in the following order: top left corner, bottom left corner, bottom right
corner, top right corner, and center.
When the touch panel is adjusted correctly, a black square appears in the top left corner of the screen. If adjustment fails, a red
square appears.
If a red square appears, repeat the operation from step 1.
9. PANEL EEPROM
Select this mode to display the contents of the panel's EEPROM. The contents cannot be changed.
10. Machine EEPROM
Select this mode to display the contents of the sewing machine's EEPROM.
4 - 14

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pr620

Table of Contents