Refitting The Headlight Mask With The Headlight (Freeride E-Xc); Changing The Headlight Bulb (Freeride E-Xc) - KTM Freeride E-SX Owner's Manual

15 ELECTRICAL SYSTEM
15.6 Refitting the headlight mask with the headlight (Freeride E‑XC)
15.7 Changing the headlight bulb (Freeride E‑XC)
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
–
Connect plug-in connectors of turn signals

lock .
C00812-11
–
Position the headlight mask and fix it with rubber straps
The holding lugs engage.
–
Position the brake line and wiring harness
C00851-10
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
–
Check the headlight setting. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Remove the headlight mask with the headlight. (
Main work
–
Turn rubber cap
the way and remove it.
–
Pull bulb socket
C00813-10


p. 94)
p. 63)
p. 92)
p. 37)
p. 63)
p. 94)
p. 64)

together with the underlying bulb socket counterclockwise all

of the parking light out of the reflector.

, head light , and ignition

.
.
p. 89)
90