Troubleshooting Of The Battery Charger - KTM Freeride E-SX Owner's Manual

22 TROUBLESHOOTING
22.2

Troubleshooting of the battery charger

Faults
Blink code 11 on battery charger
Blink code 12 on battery charger
Blink code 13 on battery charger
Blink code 51 on battery charger
Blink code 63 on battery charger
Blink code 65 on battery charger
The faults are indicated by LED
codes are displayed on the charger and refer to the charger itself.
Tip
The first step to take in case of any fault is to switch off the battery charger,
wait for 15 seconds, and then switch it back on.
If a fault is not eliminated by the measures specified here, an authorized KTM
workshop will be happy to help you.
Info
The pause between the signals of the 1st digit is 0.25 seconds.
402156-10
The pause between the 1st and 2nd digits is 1 second.
The pause between the signals of the 2nd digit is also 0.25 seconds.
The pause until the blink code repeats is 3 seconds.
Possible cause
Fault in the charging cable
Fault in the charging cable
Fault in the charging cable
Overtemperature of the battery
charger
Fault in the supply voltage
Fault in the supply voltage

on the battery charger. All of the following blink
Action
–
Check the charging plug and charging cable for
external damage and reconnect.
–
Check the charging plug and charging cable for
external damage and reconnect.
–
Check the charging plug and charging cable for
external damage and reconnect.
–
Let the charger cool down.
–
Continue charging in a cooler location.
–
Use the Normal charging mode.
–
Choose a socket closer to the central supply.
–
Use the Normal charging mode.
–
Choose a socket closer to the central supply.
112