Removing The Headlight Mask With The Headlight (Freeride E-Xc) - KTM Freeride E-SX Owner's Manual

15 ELECTRICAL SYSTEM
15.5 Removing the headlight mask with the headlight (Freeride E‑XC)
–
Use spare fuses with the correct rating only.
Fuse (58011109110) (
Fuse (58011109120) (
–
Check that the power consumer is functioning properly.
–
Close the fuse box cover and allow the catches to engage.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Switch off all power consumers.
–
Detach the brake line and wiring harness
–
Release rubber band
C00811-10
–
Disconnect plug-in connectors of turn signals

lock .
C00812-10
Warning
Fire hazard The electrical system can be overloaded if the wrong fuses
are used.
–
Use only fuses with the prescribed amperage. Never bypass or repair
fuses.
p. 115)
p. 115)
Tip
Replace the spare fuse in the fuse box so that it is available if needed.
p. 94)
p. 63)
p. 37)
p. 63)
p. 94)
p. 64)

. Slide the headlight mask up and swing it forward.

.
 
, head light , and ignition
89