Display; Multifunction Display; Map-Select Tip Switch; Driving Mode Display - KTM Freeride E-SX Owner's Manual

7

DISPLAY

7.1

Multifunction display

7.1.1 Multifunction display
7.1.2

Map-select tip switch

7.1.3

Driving mode display

The multifunction display is attached in front of the seat.
Overview of the multifunction display
1 Map-select tip switch (
2 Driving mode display (
3 Electric motor indicator lamp (MIL) (
4 Charge level indicator (
402132-10
The map-select tip switch
Possible states
The vehicle is in standby mode – the map-select tip switch is active.
•
The vehicle is in ready mode – the map-select tip switch is active.
•
All other vehicle conditions – the map-select tip switch is inactive.
•
402133-10
Red driving mode displays with the numbers 1, 2 or 3 show the driving mode selected.
Three different driving modes are available. The driving modes determine how the vehi-
cle reacts to throttle grip operation.
The figures only show approximate values for illustrative purposes, and do not describe
the actual reaction.
Driving mode 1 is Economy: the motor torque is reduced by half.
Driving mode 2 is Standard: the further the throttle grip is twisted open, the more the
motor power increases.
Driving mode 3 is Advanced: the greatest increase in power occurs immediately, after
which the motor power increases more slowly.
402137-01
p. 27)
p. 27)
p. 28)
p. 28)

determines the driving mode.
27