15
ELECTRICAL SYSTEM
–
Using a coin, turn protection cap
–
Remove speedometer battery
–
Insert the new battery with the label facing outward.
Speedometer battery (CR 2032) (
–
Check the O-ring of the protection cap for correct seating.
C00820-10
–
Position protection cap
–
Press any button on the speedometer.
The speedometer is activated.
–
Position the speedometer in the holder.
–
Mount and tighten the screws with washers.
C00821-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Install the KTM PowerPack. (
–
Lock the seat. (
–
Check the headlight setting. (
–
Set the speedometer. (
all the way counterclockwise and remove it.
.
p. 115)
and turn all the way clockwise using a coin.
p. 94)
p. 63)
p. 92)
p. 29)
p. 90)
93