12
SERVICE WORK ON THE CHASSIS
12.1
Raising the motorcycle with the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
12.2
Removing the motorcycle from the lift stand
Note
Danger of damage The parked vehicle may roll away or fall over.
–
Always place the vehicle on a firm and even surface.
12.3
Bleeding the fork legs
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Use the motor guard underneath the motor to raise the vehicle.
Lift stand (54829055000)
The wheels are no longer in contact with the ground.
–
Secure the motorcycle against falling over.
401942-01
Main work
–
Remove the motorcycle from the lift stand.
–
Remove the lift stand.
–
To park the motorcycle, press side stand
the motorcycle on it.
401943-10
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with the lift stand. (
Main work
(Freeride E‑SX)
–
Release bleeder screws
Any excess pressure escapes from the interior of the fork.
–
Tighten the bleeder screws.
C00687-10
p. 37)
p. 63)
p. 94)
p. 64)
to the ground with your foot and lean
p. 94)
p. 63)
p. 37)
p. 63)
p. 94)
p. 64)
p. 49)
.
49