12
SERVICE WORK ON THE CHASSIS
12.7
Removing the fork protector
12.8
Installing the fork protector
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Remove screws
–
Remove screws
C00801-10
–
Remove screws
C00802-10
Main work
–
Position the fork protector on the right fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
C00802-11
–
Position the fork protector on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
(Freeride E‑SX)
–
Position the brake line and clamp. Mount and tighten screws
(Freeride E‑XC)
–
Position the brake line, wiring harness, and clamp. Mount and tighten
screws
C00801-11
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 37)
p. 63)
p. 94)
p. 64)
. Take off the clamp.
on the left fork leg. Take off the fork protector.
on the right fork leg. Take off the fork protector.
.
p. 94)
p. 63)
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
.
53
.
.