12
SERVICE WORK ON THE CHASSIS
12.33
Checking the swingarm
12.34
Checking the rubber grip
12.35
Additionally securing the rubber grip
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
Main work
–
Check the swingarm for damage, cracking, and deformation.
»
If the swingarm shows signs of damage, cracking, or deformation:
–
Change the swingarm.
402152-01
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
–
Check the rubber grips on the handlebar for damage and wear and to ensure they
are firmly seated.
»
If a rubber grip is damaged, worn, or loose:
–
Change the rubber grip.
Rubber grip adhesive (00062030051) (
–
Additionally secure the rubber grip. (
401197-01
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Check the rubber grip. (
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rub-
ber grip.
401198-01
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 94)
p. 63)
p. 37)
p. 63)
p. 94)
p. 64)
Info
A damaged swingarm must always be changed. Repair of the
swingarm is not authorized by KTM.
p. 94)
p. 63)
p. 37)
p. 63)
p. 94)
p. 64)
p. 70)
p. 94)
p. 63)
p. 119)
p. 70)
70