Removing The Lower Triple Clamp - KTM Freeride E-SX Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.9

Removing the lower triple clamp

Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
(Freeride E‑SX)
–
Remove the start number plate. (
(Freeride E‑XC)
–
Remove the headlight mask with the headlight. (
–
Remove the front fender. (
–
Remove the fork legs.
Main work
(Freeride E‑SX)
–
Open the holder
C00715-10
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it aside.
C00694-10
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
C00693-10
(Freeride E‑XC)
–
Open the holder
C00835-10
p. 37)
p. 63)
p. 94)
p. 64)
( p. 81)
p. 61)
( p. 50)

and detach the brake line.

.

.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.

and protective ring
 and detach the brake line.
p. 49)
p. 60)
p. 89)

.
54