Riding Instructions; Checks And Maintenance Work When Preparing For Use; Starting - KTM Freeride E-SX Owner's Manual

9

RIDING INSTRUCTIONS

9.1

Checks and maintenance work when preparing for use

Info
Before every trip, check the condition of the vehicle and ensure that it is safe to operate.
The vehicle must be in perfect technical condition when used.
–
Check the throttle grip, main switch, KTM PowerPack, multifunction display and electric motor for external damage.
(Freeride E‑XC)
–
Check the electrical system.
–
Check the front brake fluid level. (
–
Check the rear brake fluid level. (
–
Check the front brake linings. (
–
Check the rear brake linings. (
–
Check that the brake system is functioning properly.
–
Check the coolant level. (
–
Check for chain dirt accumulation. (
–
Check the chain, rear sprocket, motor sprocket, and chain guide. (
–
Check the chain tension. (
–
Check the tire condition. (
–
Check the tire air pressure. (
–
Check the spoke tension. (
–
Clean the dust boots of the fork legs. (
–
Bleed the fork legs. (
–
Check the settings of all controls and ensure that they can be operated smoothly.
–
Check all screws, nuts, and hose clamps for a tight fit.
–
Check the charge level of the KTM PowerPack.
9.2

Starting

p. 72)
p. 77)
p. 74)
p. 78)
p. 102)
p. 65)
p. 66)
p. 84)
p. 84)
p. 85)
p. 50)
p. 49)
–
Take the motorcycle off the side stand
ber band
(Freeride E‑XC)
–
Turn the key in the ignition lock to the position
401944-10
–
Push the main switch
C00793-12
Optional:
–
Press and hold the map-select tip switch
402133-11
p. 68)

.
 into position
The vehicle is ready for operation.
Driving mode is activated when the switch is let go.

and secure the side stand with the rub-
.
.

for at least one second.
35