Adjusting The Rebound Damping Of The Fork; Handlebar Position; Adjusting The Handlebar Position - KTM Freeride E-SX Owner's Manual

11 TUNING THE CHASSIS
11.13

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14

Handlebar position

0 0
11.15

Adjusting the handlebar position

Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handle-
bar.
(Freeride E‑SX)
–
Turn adjusting screws
C00714-01
(Freeride E‑XC)
–
Turn adjusting screws
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
C00795-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
On the upper triple clamp, there are two holes at a distance of
Hole distance
The holes on the handlebar supports are placed at a distance of
Hole distance
The handlebar supports can be mounted in four different positions.
C00762-10
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (

clockwise all the way.
Info

Adjusting screws are located at the top end of the fork legs.
Make the same adjustment on both fork legs.

clockwise all the way.
Info

Adjusting screws are located at the top end of the fork legs.
Make the same adjustment on both fork legs.
15 mm (0.59 in)

3.5 mm (0.138 in)

p. 37)
p. 63)
p. 94)
p. 64)
20 clicks
15 clicks
10 clicks

to each other.

from the center.
47