14
ELECTRICAL SYSTEM
14.7
Removing headlight mask with headlight
14.8
Refitting the headlight mask with the headlight
14.9
Changing the headlight bulb
Note
Damage to reflector Reduced luminance.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
–
Switch off all electrical equipment.
–
Remove screw
–
Loosen the rubber band
101401-10
–
Pull out the electric plug connector
headlight.
C00124-11
Main work
–
Connect the electric plug connector
C00124-10
–
Position the headlight mask and fix it with the rubber band
Info
Ensure that the retaining lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on, mount and tighten
screw
.
3
101401-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Remove the headlight mask with the headlight. (
and take off clamp.
1
. Push up the headlight mask and swing it forwards.
2
and remove the headlight mask with the
3
.
1
p. 89)
.
2
p. 87)
87