Removing The Rear Wheel - KTM Freeride E-SX Owner's Manual

14 WHEELS, TIRES
14.3

Removing the rear wheel

–
Position the front wheel and insert the wheel spindle.
The brake linings are correctly positioned.
–
Mount and tighten screw
Guideline
Screw, front wheel spindle
–
Operate the front brake lever several times until the brake linings are in contact
with the brake disc.
C00711-11
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
–
Tighten screws
Guideline
Screw, fork stub
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
–
Mount the covering cap. (
–
Raise the motorcycle with the lift stand. (
Main work
–
Remove nut
–
Remove chain adjuster
Info
Withdraw wheel spindle
pushed forward.
–
Push the rear wheel forward as far as possible. Remove the chain from the rear
sprocket.
Info
Cover the components to protect them against damage.
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swing arm.
Info
Do not operate the rear brake lever when the rear wheel is removed.
Always lay the wheel down in such a way that the brake disc is not dam-
aged.
C00735-10
–
Remove spacers
C00736-10
 .

.
p. 94)
p. 63)
p. 37)
p. 63)
p. 94)
p. 64)
 .

.

only enough to allow the rear wheel to be

.
M20x1.5 35 Nm
(25.8 lbf ft)
p. 49)
M8 15 Nm
(11.1 lbf ft)
p. 49)
82