Paper Jamin Mp Tray - Samsung CLX-6260FD Service Manual

Clx-6260 series
Hide thumbs Also See for CLX-6260FD:
Table of Contents

Advertisement

► Error Code
M1–1610
► Error message

Paper Jamin MP tray

► Symptom
The jammed paper has occurred in the MP tray.
► Troubleshooting method
1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings.
a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part
or replace it.
b) Check if the actuator is assembled correctly.
3) If the pick up clutch is defective, replace it.
4) If the problem persists, replace the MP unit.
► Error Code
M1–5112
M1–5612
► Error message
Paper Empty in Tray1
Paper Empty in MP Tray
► Symptom
Paper is empty in Tray1
► Troubleshooting method
1) Take off the cassette. If there is no paper on the tray, load the paper.
2) If the problem persists, check the following.
a) Check if the paper empty sensor is contaminated or defective. Replace it.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-53

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CLX-6260FD and is the answer not in the manual?

Questions and answers

zirkia
April 1, 2025

How can i bypass the printer to use generic cartrigde

This manual is also suitable for:

Clx-6260ndClx-6260fwClx-6260fr

Table of Contents

Save PDF