Interface Cables; Using The Usb Interface - Fuji Xerox DocuCentre S2010 User Manual

Interface Cables

When connecting the machine directly to a computer, use the USB interface. When
connecting the machine to a network, use the Ethernet interface.

Using the USB Interface

The machine supports the USB 1.1/2.0 interface.
To connect the USB cable:
1
Press the power switch to the [ ] position to
turn the power OFF.
Note
2
Connect a USB cable to the USB 1.1/2.0
interface connector.
3
Connect the other end of the USB cable to the computer.
4
Press the power switch to the [ | ] position to
turn the power ON.
• Check that the display of the status
machine diagram is turned off.

Interface Cables

2
29