Fuji Xerox DocuCentre S2010 User Manual page 37

Machine Name
You can enter the printer name (between 1 and 32 ASCII code characters excluding
colons (:), equal signs (=), at symbols (@), or asterisks (*), which are not valid).
Location
You can enter the machine's location (up to 255 ASCII code characters).
Contact Person
You can enter the contact person's information (up to 255 ASCII code characters).
Administrator's E-mail Address
You can enter the e-mail address of the system administrator (up to 128 characters).
Comment
You can enter machine comments (up to 255 ASCII code characters).
Apply button
You can apply changes by pressing this button.
Energy Saver Settings (General Setup)
Time to Low Power Mode
You can set the time elapse from the last operation until the machine enters Low Power
mode. You can set a value between 1 and 60 minutes. (Default: 1)
Time to Sleep Mode
You can set the time elapse from Low Power mode until the machine enters Sleep
mode. You can set a value between 1 and 239 minutes. (Default: 1)
Apply button
You can apply changes by pressing this button.
Internet Services Settings (General Setup)
Display Language
You can change the screen display language. You can select from English, Simplified
Chinese, Traditional Chinese or Korean. (Default: English)
Apply button
You can apply changes by pressing this button.
Port Settings (Connectivity)
Port
You can activate or deactivate communication ports. You can select from SNMP, LPD, and
Port9100. Activate each port by checking its checkbox.
Apply button
You can apply changes by pressing this button.
Note • Reboot machine to enable new settings.
Using CentreWare Internet Services
2
37