Table of Contents
Advertisement
3.9 Connecting cables
This section covers the connection of the USB cable, LAN cable, and phone cable.
3.9.1
USB cable
Connect the USB cable to your PC or notebook to be used for printing and scanning operation.
1. Connect the USB cable to the USB connector at the back of the printer.
2. Connect the other end of the USB cable to the USB port on your computer.
Notes:
•
Both the USB port and the LAN connector supports hot plug, you don't have to switch the power off
before connecting the cables.
•
Connect a USB cable only after the software driver has been installed on the computer.
3.9.2
LAN cable
Connects the printer to a network via an ethernet connection.
1. Connect the LAN cable to the LAN cable connector at the back of the printer.
2. Connect the other end of the LAN cable to the LAN drop on your computer.
All manuals and user guides at all-guides.com
1
- 31 -
2
Advertisement
Table of Contents
