Unable To Load Scan Data To A Pc - Fuji Xerox DocuCentre S2010 User Manual

Unable to Load Scan Data to a PC

The table below lists possible solutions when you are unable to load a scanned
document to a computer.
Symptom
Unable to find
the scanner.
Unable to load
data from the
scanner due to a
TWAIN
communication
error.
Operation
stopped while
loading data.
Possible Cause
The machine's power is not
ON.
The PC's USB cable is
disconnected.
The machine's USB cable is
disconnected.
The scan driver is not
installed.
Is the file size too large?
Remedy
Switch the machine's power ON.
Refer to "Power Source" (P.52).
Reconnect the computer's disconnected
USB cable.
Refer to "Interface Cables" (P.29).
Reconnect the machine's disconnected
USB cable.
Refer to "Interface Cables" (P.29).
Install the scan driver.
Lower the resolution setting, and then try
loading the data again.
Scan Problems
11
165