Right Side, Rear - Fuji Xerox DocuCentre S2010 User Manual

No. Component
12 Left cover [A]

Right Side, Rear

5
4
No. Component
1 Power switch
2 Power cord connector
3 Adjusting foot
4 USB 1.1/2.0 interface
connector (Type B)
5 10BASE-T/100BASE-TX
interface connector
Open this cover to remove any jammed paper.
Note • When the machine works properly, this cover is locked. To open
this cover, make sure to exit Sleep mode and turn the machine's
power OFF.
Switches the power of the machine on and off.
For more information, refer to "Power Source" (P.52).
Connects the power cord.
Prevents the machine from toppling over. Move the machine to its
installation site and then rotate this adjuster in clockwise direction until it
touches a floor.
Connect a USB 1.1/2.0 cable.
Connect a network cable.
Note • The 10BASE-T/100BASE-TX interface connector is available when
the optional Simple Network Print Kit is installed.
Machine Components
Description
1
2
3
Description
3
49