Fuji Xerox DocuCentre S2010 User Manual page 157

Symptom Possible Cause
The printout The paper is damp.
contains white
The paper is unsuitable.
areas, or white or
colored stripes.
The printout is When using the Bypass tray
faint overall. to print, the paper size
specified in the print driver
does not match the type and
size of the paper actually
loaded.
Multiple pages were fed
through the machine at
once.
The paper is The paper is unsuitable.
wrinkled.
Paper has been added to
the paper loaded.
The paper is damp.
Text is blurry. The paper is unsuitable.
Paper has been added to
the paper loaded.
The paper is damp.
White or color The drum cartridge has
patches appear deteriorated or been
vertically. damaged.
The toner cartridge has run
out of toner.
Paper feed
向
direction
Image Quality Problems
Remedy
Replace the paper with new paper.
Load the correct type of paper.
Load paper of the correct type and size in
the Bypass tray.
Refer to "Loading Paper in Bypass Tray"
(P.76).
Riffle through the stack of paper thoroughly
before loading it.
Replace the paper with new paper.
Replace the paper with new paper.
Replace the drum cartridge with a new
one.
Refer to "Replacing the Drum Cartridge"
(P.142).
Replace the toner cartridge with a new
one.
Refer to "Replacing the Toner Cartridge"
(P.139).
11
157