Fuji Xerox DocuCentre S2010 User Manual page 161

Symptom Possible Cause
Striped patterns The document's
appear in copies. enlargement factor is too
large.
Copies are out of You have not placed the
position or document correctly.
crooked.
The document feeder's
document guides are
misaligned.
You have not mounted the
tray securely.
The paper guides of the
Bypass tray are misaligned.
The document size is not
correct.
The paper size is not
correct.
The copy is not The document cover or
the desired size. document glass is dirty.
The document is a
transparency or highly
translucent medium.
The document has shifted
out of position.
The document feeder's
document guides are
misaligned.
The document is creased.
The document size setting
is incorrect.
The paper size setting is
incorrect.
The edges of The document exceeds the
copies are cut printable area.
off.
The document size is not
correct.
The paper size is not
correct.
Copying Problems
Remedy
When making enlarged copies, some
enlargement factors can create striped
patterns. Adjust the copy enlargement
factor.
Refer to "Reduce/Enlarge" (P.91).
Place the document correctly.
Refer to "Placing the Document" (P.84).
Place the document correctly, moving the
document guides into contact with the
edges of the document.
Mount the tray by inserting it securely all
the way into the machine.
Place the document correctly, moving the
document guides into contact with the
edges of the document.
Check the document size set correctly.
Refer to "Original Size" (P.92).
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
Clean the document cover or document
glass.
Refer to "Cleaning Document Cover and
Document Glass" (P.144).
Place a sheet of white paper over the
document before copying.
Place the document correctly.
Refer to "Placing the Document" (P.84).
Place the document correctly, moving the
document guides into contact with the
edges of the document.
Refer to "Placing the Document" (P.84).
Smooth out the document and place it
again correctly.
Refer to "Placing the Document" (P.84).
Check the document size set correctly.
Refer to "Original Size" (P.92).
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
Adjust the reduction/enlargement factor to
reduce the copy slightly.
Check the document size set correctly.
Refer to "Original Size" (P.92).
Check the paper size set correctly.
Refer to "Setting the Paper Size" (P.80).
11
161