Fuji Xerox DocuCentre S2010 User Manual page 174

11 Problem Solving
11
174
Error Code
The size and orientation of paper
loaded in Tray 1 do not match the
settings of the machine.
The size and orientation of paper
loaded in Tray 2 do not match the
settings specified in the machine.
The size and orientation of paper
loaded in the Bypass tray do not
match the settings of the machine.
When copying using the "Pages per
Size" feature, the zoom ratio
required to fit the specified number
of pages on a sheet is beyond the
range of 25 - 400%.
Papers jammed in the machine's left
cover.
Papers jammed in the machine's
One Tray Module cover.
Cause
Confirm that the size and orientation
of paper loaded in Tray 1 match the
settings displayed in the paper size
display area, and reload paper
adjusting with the paper guides.
Refer to "Loading Paper in Trays 1 and
2 (Optional)" (P.75).
When changing the setting of paper
size and orientation, cancel the job
first by pressing the <Stop> button.
Refer to "Changing the Paper Size for
Trays 1 and 2" (P.78).
Confirm that the size and orientation
of paper loaded in Tray 2 match the
settings displayed in the paper size
display area, and reload paper
adjusting with the paper guides.
Refer to "Loading Paper in Trays 1 and
2 (Optional)" (P.75).
When changing the setting of paper
size and orientation, cancel the job
first by pressing the <Stop> button.
Refer to "Changing the Paper Size for
Trays 1 and 2" (P.78).
Confirm that the size and orientation
of paper loaded in the Bypass tray
match the settings displayed in the
paper size display area, and reload
paper adjusting with the paper
guides.
Refer to "Loading Paper in Bypass
Tray" (P.76).
When changing the setting of paper
size and orientation, cancel the job
first by pressing the <Stop> button.
Refer to "Changing the Paper Size for
Trays 1 and 2" (P.78).
Press the <Stop> button.
Change the zoom ratio to fit entirely
in the paper, place all documents,
and then press the <Start> button.
Open the machine's left cover, and
remove the jammed paper.
Refer to "E-1: Paper Jam in Left Cover
[A]" (P.180).
Open the machine's One Tray
Module cover, and remove the
jammed paper.
Refer to "E-2: Paper Jam in One Tray
Module Cover [B]" (P.181).
Remedy