Fuji Xerox DocuCentre S2010 User Manual page 42

2 Environment Settings
Apply button
You can apply changes by pressing this button.
Note
IP Filtering (Security)
You can restrict the supported IP addresses.
IPv4 Filtering
IP Filtering
You can check [Enabled] to enable IP Filtering. (Default: Off)
Edit/Delete selection checkbox
You can select the IP Filter to edit/delete.
IP Filter Rule List
The IPv4 address that is allowed from access is displayed.
2
Add button
The Add IP Filter Rule - IPv4 screen is displayed. You can add the IPv4 address
that is allowed from access. You can add up to 10 IPv4 addresses.
Edit button
The Edit IP Filter Rule - IPv4 screen is displayed. You can edit the IPv4 address
that is allowed from access.
Delete button
You can delete the IPv4 address that is allowed from access.
IPv6 Filtering
IP Filtering
You can check [Enabled] to enable IP Filtering. (Default: Off)
Delete/Edit selection checkbox
You can select the IP Filter to edit/delete.
IP Filter Rule List
The IPv6 address that is allowed from access is displayed.
Add button
The Add IP Filter Rule - IPv6 screen is displayed. Adds an IPv6 address that is
allowed from access. You can add up to 10 IPv6 addresses.
42
• Reboot machine to enable new settings.
- Source IP Address:
You can set the IP address that is allowed from access.
- Source IP Mask:
You can set the prefix length of the IP address that is allowed from access.
(Default: 0)
- Source IP Address:
You can set the IP address that is allowed from access.
- Source IP Mask:
You can set the prefix length of the IP address that is allowed from access.
(Default: 0)
- Source IP Address:
You can set the IP address that is allowed from access.