Fuji Xerox DocuCentre S2010 User Manual page 150

11 Problem Solving
The print quality
is poor.
Unable to insert
or remove a tray.
Unable to copy
with the specified
size.
11
150
Symptom Possible Cause
An image quality problem
may have occurred.
Did you open a cover or
switch the machine off
during printing?
Is the document glass or the
document cover dirty?
Is the document a
transparency or highly
translucent medium?
Is the document in the
correct position?
Is the document loaded
correctly?
Are the document guides on
the document feeder set in
the correct positions?
Is the document folded?
Remedy
Take the required action described in
"Image Quality Problems".
Refer to "Image Quality Problems" (P.153).
Do not forcibly insert or remove the tray.
Switch off the power. In a few seconds,
switch on the power. When the machine is
ready to receive data, insert or remove the
tray.
Clean the document glass or document
cover.
Refer to "Cleaning Document Cover and
Document Glass" (P.144).
Use the document glass to copy the
document, placing a sheet of white paper
on top of it.
Place the document correctly.
Refer to "Placing the Document" (P.84).
Align the document guides correctly.
Refer to "Placing the Document" (P.84).
Smooth out the document and place it
again correctly.
Refer to "Placing the Document" (P.84).