Fuji Xerox DocuCentre S2010 User Manual page 117

Program
Menu Items
Numbers
101 Sleep Mode
Timer
102 Auto Reset
Timer
103 Auto Print Timer Set the amount of time that
104 Auto Scan
Complete Timer
105 Job Cancel
Timer
106 Job Done Timer
202 Report Manual
Output Direction
Descriptions
Set the amount of time that
the machine enters Sleep
mode from Low Power mode.
You can set a value between
1 and 239 minutes (in 1
minute increments).
Sleep mode minimizes power
consumption by shutting off
the power to all components
except the controller. Warm-
up time in Sleep mode is
longer than in Low Power
mode.
Set the amount of time that
the machine waits before
automatically returning to the
default display screen when
no operation is being
performed.
the machine waits after the
operations such as using the
control panel, placing or
removing a document in the
document feeder, and taking
out or putting in a tray, until
starting to print automatically.
You can set a value between
1 and 240 minutes (in 1
minute increments).
Set the amount of time that
the machine waits before
automatically processing the
next job determined that
there is no additional
document to be loaded when
using the document glass.
Set the amount of time that
the machine waits before
automatically cancelling all
jobs that are being paused
when an error occurs.
Set the amount of time for the
job complete screen to be
displayed in the control panel
when a job is completed.
Select the report to print.
System Administrator Program List
Values
(*: Default setting)
1* - 239 minutes
0: 15 seconds
1: 30 seconds
2: 45 seconds*
3: 1 minute
4: 2 minutes
5: 3 minutes
6: 4 minutes
1 - 240 seconds
(Default: 10 seconds)
1: 20 seconds
2: 30 seconds*
3: 60 seconds
4: 90 minute
0: Invalid
60 - 5940 seconds
(Default: 600 seconds)
1 - 10 seconds
(Default: 3 seconds)
1: System Settings Report*
2: Service Settings Report
3: Job History Report
4: Error History Report
5: Job Counter Report
8
117