Setting The Paper Type - Fuji Xerox DocuCentre S2010 User Manual

Setting the Paper Type

This section describes how to set the type of paper loaded in tray.
The paper type is set to standard type as default. When loading a different type of paper
into a tray, change the paper type setting according to the type of paper loaded in the
tray to keep the print quality.
Refer to "Supported Paper Type" (P.71).
1
Enter the System Administration Mode.
Refer to "Enter the System Administration Mode" (P.114).
2
Press the program number of the tray that you want to confirm.
500
501
502
The current value is displayed.
3
Press the <Size (Press 2sec)> button to start changing the setting.
4
Enter the program number of the paper type that you want to set, and press the
<Start> button.
0
2
5
After the entered program number blinks twice,
the new setting is confirmed.
Program Number
Program Number

Setting the Paper Type

Item
Tray 1
Tray 2
Bypass Tray
Item
Normal
Heavyweight
Lightweight
4
81