Cleaning Document Feeder Rollers - Fuji Xerox DocuCentre S2010 User Manual

10 Maintenance

Cleaning Document Feeder Rollers

If the document feeder rollers become soiled, smudges may appear on copies, or
scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder rollers about once a
month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
1
Lift the latch of the document feeder top cover
until it is completely open.
Note
2
While turning the rollers, wipe them with a soft
cloth moistened with water.
Important • Do not use cleaning agents other than
Note
3
Close the document feeder top cover until it clicks into place, and confirm that there is
no space between the near or far side of the cover and the document feeder.
10
146
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying, scanning, or printing.
• When you fully open the cover, it enters a
fixed position. Open the cover gently.
water or neutral detergent.
• Use a cloth firmly wrung to prevent water
drops from falling into the machine. If water
gets into the machine, it may cause the
machine to malfunction.
• If you cannot remove dirt easily, gently wipe
the rollers with a soft cloth moistened with a
small amount of neutral detergent.