Control Panel - Fuji Xerox DocuCentre S2010 User Manual

3 Product Overview

Control Panel

The names and functions of the control panel's components are described below.
23
22
21
20
3
No. Component
1 <2 Sided> button
2 <ID Card Copy> button
3 <Original Size> button
4 Numeric keypad
5 <Log In / Out> button
6 <Energy Saver> button
7 <Stop> button
56
1 2
19 18 17 16
Press this button to select 1 Sided or 2 Sided copying.
Normally, the icon is off (1 Sided → 1 Sided). The selection moves to
the right from [Off] (1 Sided → 1 Sided) → [1 Sided → 2 Sided] → [2
Sided → 2 Sided] → [2 Sided → 1 Sided] every time that the button is
pressed. As you press the button when the [2 Sided → 2 Sided] is
selected, the indicator light is turned off again.
For more information, refer to "2 Sided" (P.96).
Press this button to use the ID Card Copy feature.
While the ID Card Copy feature is selected, the button is lit.
For more information, refer to "ID Card Copy" (P.94).
Press this button to specify the scanning size and orientation for using
the document glass.
When the document is placed on the document feeder, the scanning
size is set automatically.
The scanning size changes on the status machine diagram every time
that the button is pressed.
For more information, refer to "Original Size" (P.92).
Press these numeric buttons to enter numbers, such as the total number
of copies.
Press this button to enter or exit the System Administration Mode. The
<Log In/Out> button is lit in the System Administration Mode.
For more information, refer to "Enter the System Administration Mode"
(P.114).
Press this button to enter an energy saver mode to save the electricity
when the machine is not in use, and then the button is lit.
Press the <Energy Saver> button to exit an energy saver mode.
For more information, refer to "Energy Saver Modes" (P.54).
Press this button to cancel a current job or errored job.
3 4 5
15 14 13 12 11
Description
6
7
8
9
10