Fuji Xerox DocuCentre S2010 User Manual page 178

11 Problem Solving
11
178
Error Code
092-660
ATC SNR (in drum cartridge) value
is out of range.
092-668
092-661
Temperature SNR (in drum
cartridge) value is out of range.
092-910
An error occurred.
093-312
093-400
Out of toner.
093-406
Time to replace the toner cartridge
soon.
116-321
An error occurred.
116-323
116-334
116-377
116-747
Unable to complete scanning due to
the scanning area being too small.
117-326
An error occurred.
117-327
123-314
An error occurred.
Cause
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same message is displayed
again, contact our Customer
Support Center.
Replace the toner cartridge.
Refer to "Replacing the Toner
Cartridge" (P.139).
Have a replacement toner cartridge
ready.
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same message is displayed
again, contact our Customer
Support Center.
Decrease the value of the Erase
Frame or reduce the zoom ratio.
Refer to "Reduce/Enlarge" (P.91).
Switch off the machine power, make
sure that the display is blank, and
then switch on the machine power. If
the same message is displayed
again, contact our Customer
Support Center.
Remedy