Fuji Xerox DocuCentre S2010 User Manual page 43

- Source IP Mask:
You can set the prefix length of the IP address that is allowed from access.
(Default: 0)
Edit button
The Edit IP Filter Rule - IPv6 screen is displayed. Edits the IPv6 address that is
allowed from access.
- Source IP Address:
You can set the IP address that is allowed from access.
- Source IP Mask:
You can set the prefix length of the IP address that is allowed from access.
(Default: 0)
Delete button
You can delete the IPv6 address that is allowed from access by pressing this
button.
Apply button
You can apply changes by pressing this button.
Note
System Administrator Settings (Security)
You can set the system administrator's user ID and passcode.
System Administrator Settings
Administrator's Login ID
You can enter the system administrator's user ID (between 1 and 32 ASCII code
characters in length, excludes "+", ";", "<", ">", """, "?", "[", "]", "'", "{", "}", "|", ":".
(Default: 11111)
Administrator's Passcode
You can set the system administrator's passcode (between 4 and 12 ASCII code
characters or blank). (Default: x-admin)
Retype Administrator's Passcode
You need to re-enter the system administrator's passcode that you have entered.
Maximum Login Attempts
When login attempts using the system administrator's user ID fail repeatedly,
access is denied when the number of failed attempts reaches the number set here.
Specify a number between 0 and 10. Specify 0 to disable this setting.
The total number of failed authentication attempts is reset when authentication is
successful or the system is restarted. (Default: 5)
Apply button
You can apply changes by pressing this button.
• Reboot machine to enable new settings.
Using CentreWare Internet Services
2
43